What? self-made pencil case:)
What do you need? fabric (about 22cm x 24cm), 20cm long zip
How Expert:? easily
First fold the two sides once around 22cm (about 1cm).
Then we're off: Take the zipper. Sets the folded side on one side of the zipper and sew close to zip along, from the End of the zipper in the direction of slide.
This could be a little difficult, even with my bitchy sewing zippers, because the slide is often too thick and wide for the foot of the sewing machine. So here's the trick: sewing about 3 / 4 of the route. Let the needle in the fabric, lift your foot, making the zipper on gently. Then you can easily sew back on. 
sewing the other side on the zipper. In the end, hopefully this: 
Get out: everything inside out.
are now sewed the short sides. Simply "over chatter": P and this bit of fiddling, the zipper could again be bulky, so maybe moving the slider again somewhere else.
The second short side sew, but first let the zipper open, or at least somewhat open so you can all turn to sew up the back on the right.
done already:)
0 comments:
Post a Comment